Tips On Maintaining Your Swimming Pool

Your pool will give you relief from the blazing summer sun, but it needs maintenance in return. Here are 4 useful tips for maintaining your pool so you can swim all summer.

1. Shock treatment

A strong chlorine smell is a sure sign that your pool needs a shock treatment.

What you actually smell is chloramine, or combined chlorine, a compound that is formed when chlorine is combined with sweat, rainwater, cosmetics, urine, and other substances.

Despite its strong odor, combined chlorine is a weak disinfectant that can irritate eyes and skin.

To restore the effectiveness of the disinfectant, you will need to add a large amount of granulated chlorine (a process known as super chlorination), or use a non-chlorine shock containing either potassium hydrogen sulphate or hypochlorite. lithium.

Pools should receive a shock treatment when they are opened for the first time in the year and once a week thereafter (more often if used by many swimmers).

2. Coat or repaint a concrete swimming pool

Over time, pool chemicals and extreme fluctuations in water temperature will impact a concrete pool.

On average, swimming pools in temperate zones should be plastered every 10 to 15 years or repainted every three to five years. However, this can vary.

If you notice excessive chipping, now is probably a good time to call the contractor.

3. Determine if there is a leak

Do you think your swimming pool may be leaking? Try this:

1. Place a 19-liter bucket on the second step and fill it up to the pool level (place a brick inside to hold it in place).

2. Mark the water level in the bucket.

3. Turn off all pumps, mark the pool water level outside the bucket, then restart the equipment.

4. After a day or two, look at the bucket; if the level of the pool is lower than the level of the bucket, there is a leak.

  • 4. Find the leak

You may be able to determine its location with a dye test:

1. Use an empty reagent bottle or a small squeeze bottle filled with food coloring.

2. Squeeze a little dye into suspect areas, especially behind ladders, near steps and lights, and around corners and tile joints.

3. If the dye is sucked in, you have found your leak.

Although there are ways to fix a leak yourself, we recommend that you consult an expert to avoid making the leak worse.

You don’t have to pay a lot of money to maintain your pool! With a little willpower, you can even do this without anyone’s help. I always hear that the steps to properly maintain a swimming pool are difficult, and that you have to call in the professionals to get it done right.

Well, because you don’t always have money to spend on this, I’m going to show you in 4 tips that you can take care of your pool on your own.

PH regulation and water disinfection

The first thing to remember is that a well-regulated pH can only improve the effectiveness of the products you use for the maintenance of your swimming pool. It is also the main element that will give you a minimum of comfort when you bathe.

If you are using a Bromine treatment, the value I recommend is between 7.4 and 7.6. For treatments with active oxygen or chlorine, this value should not exceed 7.4 and should not be less than 7.0.

You should check the pH level at least once a week, and adapt the treatments according to the results. If they are too low, use pH Plus. Otherwise, the lower pH is what I recommend.

When it comes to disinfecting pool water, you have the choice between multi-function chlorine, slow roller chlorine, shock chlorine and AquabromeBayrol. I have a little preference for multi-purpose chlorine which can do a whole lot of stuff in a short time.

Destroy germs in the water

Like nothing, germs are making the good life in your swimming pool water. To avoid the risk of falling prey to disease, it is best to use liquid anti-algae or desalines. It will save you from seeing green mounds forming at the bottom or the edges of your swimming pool, and you will have peace of mind for a while.

Remember to clarify the pool water

To clarify your swimming pool water and improve filtration efficiency, there is no miracle method! The best tip is to use a clarifier-flocculant which will limit the formation of algae, facilitate filtering, and give the water a much lighter color.